Complete rear frame for the BMW Duoshock (2 spring struts) models.
This rear frame can be installed in a short time without flexing or welding work
Time to be swapped for the originals. Even the original ones
Suspension struts can be taken over one to one.
In this way, the appearance of the BMW can be changed significantly in a short time
become.
The frame is made of chromoly steel and is very
robust, despite the comparatively low weight and tube diameter.
Dimensions
- Total length: approx. 555mm
- Maximum width: about 235mm
- Minimum width at the tank connection: approx. 160mm
The following benches fit without
Modification on this rear frame
- SB-G6
- SB-G11
- SB-G22
- SB-G39
- SB-G6D
- SB-G6Z
- SB-G6B
Suitable for the following Twinshock models
- R45
- R65
- R75
- R100
There is no expert opinion, but the entry is after
Experience has shown that consultation with a motorcycling TÜV inspector is not a problem
(If so: ask someone else).
You will find a suitable wiring harness under the item number "KA-BAU"
for the rear electrics (for taillights & indicators).
Eliminates the need to remove the original wiring harness when customizing the motorcycle.
The original wiring harness can thus remain in the original rear frame. Should be a
When a trip is pending, the original frame can be easily reinserted in just a few simple steps.
For example, you can take advantage of the luggage set and the large 2-man bench for touring
continue to be used.
Under the item number "KF-HL" you will find an aluminum fender that makes the unsightly
original plastic fenders of all BMW R models replaced.
Free shipping within Germany!
GB: SUBFRAME for BMW R-model, twinshock
| Shipping weight: |
0,85 kg
|
| Item weight: |
0,85 kg
|
Herstellerangaben:
Kickstarter Ltd. & Co. KG Lützenkirchener Str. 151 51381 Leverkusen / Germany www.kickstarter.de info@kickstarter.de +49 2171 3667946
There are no reviews yet.
